Protective finishes
LOBA 2K Supra A.T.
A ceramic-reinforced 2K water-based topcoat offering exceptional durability and approved for the 2K Contact system.
Official LOBA siteLOBA · Protective finish additives
LOBA SlipResist in the parquet care system
An additive providing certified slip resistance in precisely specified finish combinations.
Best suited for
Final coat of an approved LOBA finish when the project requires a verified R10 or R11 combination.
Application rate / dilution
Exactly 100 g per 5 l/5 kg of approved finish; use only in the final coat.
Time
Drying times for the base finish remain unchanged. For a 2K product, the pot life starts after the hardener is added.
Correct role
How the product fits into the system.
For a 2K finish, mix in SlipResist before adding the hardener. Then use the mixture within the base finish's specified pot life.
For the full process, limitations and related product selection, open the guide to protective coating for parquet.
Product limitations
R10/R11 applies only to combinations listed in the current TDS; the additive alone is not a general guarantee of slip resistance.
When this product is not enough
Care products cannot repair exposed or unstable wood.
If the old layer has worn through, is delaminating or is incompatible, check repairing factory-finished parquet or parquet sanding .
Related system
Next and previous step.
Protective finishes
LOBA 2K Duo
A highly durable 2K water-based polyurethane finish and an additional approved topcoat for the 2K Contact system.
Official LOBA site
Protective finishes
LOBA 2K InvisibleProtect
An almost invisible, exceptionally durable water-based protective finish that preserves the look and feel of bare wood.
Official LOBA siteSelected product
Enquire about LOBA SlipResist.
We will add the selected product to the form. Please also include a surface photo, approximate floor area and any known details of previous care.
Send enquiry