Renovation without sanding
LOBA 2K Contact
2-component water-based adhesion primer for recoating suitable factory UV-finished parquet without sanding the existing finish.
Official LOBA siteLOBA · Protective finishes
LOBA 2K Supra A.T. in the parquet care system
A ceramic-reinforced 2K water-based topcoat offering exceptional durability and approved for the 2K Contact system.
Best suited for
Heavily trafficked wood floors; for sanding-free renovation of a factory UV finish, use only with a correctly prepared 2K Contact system.
Application rate / dilution
100–120 ml(g)/m² per coat, equivalent to 8–10 m²/l(kg).
Time
Mixing ratio 10 : 1; pot life 2 hours; recoat or walk on after at least 4 hours; full use after 12 hours; first care treatment and covering after 3 days.
Correct role
How the product fits into the system.
Apply with LOBA Deluxe 120 or Microfibre 100–120. Recoating an old finish directly normally requires abrasion; the only sanding-free exception is an approved 2K Contact system.
For the full process, limitations and related product selection, open the guide to protective coating for parquet.
Product limitations
Do not use the term "no sanding" without naming 2K Contact, a test area and confirmed suitability of the existing UV finish.
When this product is not enough
Care products cannot repair exposed or unstable wood.
If the old layer has worn through, is delaminating or is incompatible, check repairing factory-finished parquet or parquet sanding .
Related system
Next and previous step.
Deep cleaning
LOBA CareRemover
pH-neutral remover for old care-product layers and stubborn dirt.
Official LOBA site
Protection additives
LOBA SlipResist
An additive providing certified slip resistance in precisely specified finish combinations.
Official LOBA siteSelected product
Enquire about LOBA 2K Supra A.T.
We will add the selected product to the form. Please also include a surface photo, approximate floor area and any known details of previous care.
Send enquiry